| Vessel Diameter | 60in. (152 cm) |
| Vessel Seam to Seam Length | 6 ft. (1.8 m) |
| Trailer Dimensions | 8.4W x 12.8H x 20L ft (2.6W x 3.9H x 6.1L m) |
| Gross Weight | 9,500 lb. (4,300 Kg) |
| Working Pressure | 250 psi (17 bar) |
| Temperature Range | -20°F to 200°F (-29 to 93°C) |
| Gas Rate | 5 MMSCFD (142 Mm³) |
| Liquid Rate | 5,000 bbl./day (795 m³/day) |
| Pressure Safety Valve | 2 x 2" Taylor |
| Connections | |
| Oil Inlet | 2 in. Fig 206 Female |
| Gas | 3 in. Fig 206 Male |
| Oil | 2 in. Fig 1502 Male |
| Water | 2 in. Fig 1502 Male |
| Drain | 2 in. Fig 1502 Male |
| Relief | 4 in. Fig 206 Male |
| Codes and Standards | ASME Sec. VIII Div. 1, ASME B31.3 NACE MR0175, AGA 7 |
The Vertical Low-Pressure Separators are primarily used for the second stage of Separation. The large diameter vertical three phase separator operates at lower pressure than the first stage three phase separators. In the second stage the large volume and lower pressure allow dissolved and entrained gases to separate before the liquid hydrocarbons are transferred to stack tanks for storage. TSI vertical Pressure Vessel is able to achieve separation by using internal components to aid in separation. The vessel further eliminates entrained liquids in exiting gas stream by directing the flow through the vane type mist extractor to coalesce the remaining liquid droplets. The vessel is equipped with measurement meters to gauge various phases. TSI vertical low-pressure separator is able to function as two or three phase separator.
TSI Fabricators Separators are engineered to meet or exceed industry standards such as ASME, ANSI and NACE. TSI separators design and fabrication are documented in each of the equipment’s data book.
Features
Benefits
Application